GLOBAL CHIMAKS

1.Main dimension

Length over pontoons:97m          Length of vessel:83.4m          Breadth,moulded:24m    

Depth, moulded:4.8m                            Design draft:2.5m                              Frame space:0.6m              

Longitudinal space:0.6m            Deckhouse camber(no camber on main deck):0.2m

2.Dredging performance

The operation area is mainly coastal and harbour area. The main dredging materials are silt,sandy soil,

fine and medium sand,etc.

Max dredging depth:25m                 Design production capacity:3500m3/h   

Design dischargedistance:6000m           Inner dia. of suction pipe:900mm

Inner dia. of discharge pipe:850mm         Clean water flowrate of dredge pump:14200m3/h

3.One set of electrical driven cutter device

To be installed at the front end of bridge, driven by the frequency conversion motor, including gear

type cutter, cutter ladder, motor, gear box, transmission shaft, suction inlet, suction dredge pipe and two

transverse pulleys at port side and starboard side.

Maker: Taizhou Huaxia Machinery Manufacturing Co.,Ltd

Cutter diameter.:2300mm    Cutter driven power:1500kw    Cutter speed:0-30r/min

4.One set of submerged dredge pump

The submerged dredge pump is driven by electrical motor. The pump set include motor, reduction gear

box and submerged dredge pump. To be installed at the front part of bridge.

Maker: Taizhou Huaxia Machinery Manufacturing Co.,Ltd

Clear water flow rate:14200m3/h       Head:28m        Speed: 265r/min      

Clear water shaft power:1580KW     Slurry shaft power:1800kw      Suction pipe dia.:900mm      

Discharge pipe dia.:850mm

5.Two sets of inboard dredge pump 

The inboard dredge pump is driven by diesel engine. The pump sets include the diesel engine,

reduction gear box, transmission shaft and inboard dredge pump, which located in the pump engine

room.

Maker: Taizhou Huaxia Machinery Manufacturing Co.,Ltd

Clean water flow rate:14200m3/h      Head:65m      Speed: 300r/min  

Clear water shaft power: 3310KW    Slurry shaft power: 3800kw       suction pipe dia.:900mm          

Discharge pipe dia.:850mm

6.Two sets of electrical driven swing winch

The swing winches include left and right side. The steel rope is out from the top. The winch can swing

the cutter by transverse pulley to dredge.

Maker:Jiangsu Qinghuai Marine Machinery Manufacturing Co.,Ltd

Pull force(first layer):650kn        Rope speed(first layer)0-20m/min

Working rope capacity:300m    Steel rope dia.:60mm.

************************************************************************************

CUTTER SUCTION DREDGER

CLASS BUREAU VERITAS

BLT 1984, BORDEAUX, FRANCE

GRT 490T

NRT 147T

LOA 46,08M

BREADTH 12.00M

DEPTH MOULDED 2.80M

ENGINE-POWER: 3 x 630 HP BAUDIN S.A FRANCE

AUXILARY DEUTZ 1 DIESEL GENERATOR

- she has daemon posıtıonıng system for dredgıng calculatıon on board

-she has fıxed shore gps statıon for posıtıonıng for dredgıng area.

- she has HDP lıne 467 mm dıameter for transferrıng the materIals to the dumpıng area.

-she has suctıon pump capacıty arround 2500-3000 cbm ttl dIschargıng cap wıth materıal.

-suctIon pump capacIty depend on materIals and weather condItion.

FOR FURTHER DETAILS PLS CONTACT US

LOCATION EAST MED

***********************************************************************************

SHIP TYPE : Cutter Suction Dredger

Reference dredge capacity : 1000cbm/hr

BUILDER :2007, China

L.O.A : 56.9m

Breadth : 9.8m

DEPTH : 2.7m

Draft : 1.7m

M/E for Main pump : LB6250ZLC-11/1103kw/825rpm

Dredging pump : 4000m3 lift:58m

Ladder pump : 4000m3 lift:25m(driven by hydraulic)

A/E:LB6210ZLC-6/730kw/830rpm x2(one to drive the main generator,another to drive the hydraulic pump)

Harbor generator:90GFC/110kw/1500rpm

Dredging depth : 18m

Suction Dia. : 550mm

Discharge Dia. : 500mm

Acco.(Bed) : 12 persons

Spud : atuo-laying appratus

Discharging pipe length:1.3km

(DTLS WOG)